Wednesday, December 16, 2009

Tinsel Pine Cone Dolls!

Pinecone Carnival Soiree! 2
Art Glitter: Designer Dries Clear Adhesive
Art Glitter: Vintage Fine Glass Glitter #611 Antique Silver
Art Glitter: Vintage Fine Glass Glitter #607 Cobalt Blue
Art Glitter: Vintage Fine Glass Glitter #608 Red Damask
Art Glitter: Vintage Fine Glass Glitter #613 Diamond Dust
Small-medium sized pinecones
Small Styrofoam balls
Crepe paper streamers: aqua, light green and pink
Tinsel garland: old fashioned silver
Tinsel chenille stems: silver
Lettered wording
Acrylic paints: Flesh color
Gel pens: black and red
Hot glue and hot glue sticks
Glue Stick
Other: paint brush, cup, water, shiny card stock, millinery flowers, tiny pompoms, sequins, tiny pearl strands

Glittered Pine Cones!
Directions for Glittered Tinsel Pine Cones:
1. Apply designer dries clear adhesive to the pinecone, then with a paint brush paint the adhesive onto all the edges.
2. Next sprinkle some #611 antique silver glass glitter or # 613 diamond dust onto the pinecone, let dry, shake off excess.
Pinecone Carnival Soiree! 8
Pinecone Carnival Soiree! 5
Directions for Pinecone Tinsel Ballerinas:
1. Apply designer dries clear adhesive to the pinecone. Then with a paintbrush, paint the adhesive onto all the edges.
2. Next sprinkle some #611 antique silver glass glitter or # 613 diamond dust onto the pinecone, let dry, shake off excess and set aside.

3. Paint Styrofoam balls w/flesh paint, let dry. Then draw a face onto them using gel pens, glue to top of pinecone.
4. Cut 2 pieces of tinsel chenille stem measuring 4 inches each. Wrap one piece around pinecone, hot glue in place. Arch the next tinsel chenille stem and hot glue to the bottom of the pinecone.
5.Begin embellishing your ballerinas with crepe paper, party hats, crowns, tinsel garland and tiny pompoms. For the hats and crowns, use cardstock, coated in either #607 cobalt blue or #608 red damask glass glitter.
Pinecone Carnival Soiree! 7
-Try glittering your pinecones with other glass glitter colors
-Make a glittered pinecone wreath using Styrofoam wreath, fill in with pinecones, securing in place with hot glue, coat pinecones with glitter, fill in vacant spots with velvet leaves or floral berries coated in glitter.
-Hang glittered pinecones from a window using pretty ribbons, place battery candle on windowsill to see the glittered pinecones glow.

Visit the Art Glitter Blog for the original post by me:

Tuesday, December 15, 2009

Glittered Toy Blocks, Storybook Toy Dolls and Bottle Brush Trees

Original post was on the Art Glitter Blog:

Confectionary Toy Block Friends!How many times have you walked into a store, saw colorful holiday trees for every occasion and in every color, some are pink, aqua and tinsel silver, others are extra enhanced with chunks of mica flakes, snow and glass glitter. Well I have found many ways to change the look of plain green trees from bottle brush to floral and wire Christmas trees, all you need is a tree, some bleach and Art Glitter.My Silver Bella Display! 5Materials:

Art Glitter-Art Glitter: Designer Dries Clear Adhesive-Art Glitter: Variety of Ultrafine Transparent Glitter
-Art Glitter: Variety of Ultrafine Opaque Glitter-Art Glitter: Variety of Fine Glass Glitters (For various effects)Paints/DyesAcrylic paints: variety of bright, pastel and metallic colorsFlocking: variety of colorsOtherHand sculpted clay figurine or store bought plastic or paper figurineSmall-medium sized bleached bottle brush trees (refer to tree bleaching and dye instructions)Container of waterTools: paintbrush, scissors, hot glue and hot glue sticksOther: crepe paper, paper, tinsel garland, tinsel chenille stems, small bulbs, millinery flowers, tiny pompoms, sequins, tiny pearl strands, flocking
Glittered Toy Blocks!
Directions for Glittering Toy Blocks
1. Coat the lettered rim part of a toy block with Dries Clear Adhesive.
2. Sprinkle wet adhesive with glitter of choice, let dry then slightly tap off excess.Nora and the Bubble Gum Soiree
Directions for Toy Block Dolls
1. Attach figurine of choice to toy wooden block using hot glue, let set a minute.
2. Begin decorating your figurine w/ flocking, texture glitter or glitter of choice. Adhere these textures using Art Glitter Dries Clear adhesive, let dry and tap off the excess.
3. Decorate your toy top with a small bottle brush glittered tree, glittered crown, glittered hat or mini bell, berries, millinery, crepe paper and tinsel.
4. Coat the toy block base using a variety of Art Glitter products.Fannie FerrystoneTips:-Use basic wooden square shapes, instead of toy blocks and coat w/glitter.-Use cupcake/sugar craft figurines and picks instead of sculpted ones.-Hot glue toy blocks to a floral wreath, add a holiday word banner and coat the blocks in various coordinating glitter colors.-Spell out your favorite holiday word using toy blocks and glitter.Icy Cherrycone
Glittering and Bleaching TreesMaterials:
Art GlitterArt Glitter: Designer Dries Clear AdhesiveArt Glitter: Designer Dries White AdhesiveArt Glitter: Faux SnowArt Glitter: Vintage Fine Glass Glitter #611 Antique SilverArt Glitter: Vintage Fine Glass Glitter #613 Diamond DustArt Glitter: Variety of Fine Glass Glitters (For various effects)Paints/DyesAcrylic paints: variety of bright, pastel and metallic colorsInk, KoolaidSpray paint base coatSpray paint or hair color spray paint: variety of bright, pastel and metallic colorsBleachOtherSmall-large sized trees (bottle brush or holiday Christmas trees)Large plastic storage container (for big trees)Small plastic or foil pan (for small-medium trees-bottle brush)Painters ventilation mask(for spray paint)NewspaperRecycled box (for spray paint)Container of waterTools: paintbrush, old salad tongs, scissors, hot glue and hot glue sticksOther: tinsel garland, tinsel chenille stems, small bulbs, millinery flowers, tiny pompoms, sequins, tiny pearl strands, flocking
glittered bleached bottle brush
Directions for Bleached and Glittered Bottle Brush Trees:
Use in ventilated area, I recommend outside or in garage
1. Place bottlebrush trees in a large pan, cover with bleach, turning trees with tongs every 5-10 minutes or so until completely bleached and no green color remains. Smaller trees will bleach faster, larger ones longer.
2. Let dry for 24 hours on a stack of newspapers or disposable plastic plate.
3. Once trees have dried, begin painting or dying them. To spray paint color on them, place in a recycled box and spray paint with the color or your choice. To dye them follow the drink mix recipe below, once dyed, let dry.
4. Once your trees have been colored and dried, apply designer dries clear adhesive to them. With a paintbrush paint the adhesive onto all the edges.
5. Next sprinkle some #611 Antique Silver Glass Glitter or # 613 Diamond Dust onto the pinecone, let dry, shake off excess. For snowy trees apply the Dries White adhesive followed by Faux Snow.

Directions for Bleached and Glittered Large Christmas Trees:

Use in well ventilated area, I recommend outside your house

1. Place medium to large trees in a recycled box or on a bed of newspapers, place tree onto this area, put on ventilation mask, and spray paint with the spray paint base coat, let dry 10 minutes, repeat.

2. Now spray paint with color of choice, the more coats you spray the brighter your trees. Always follow spray paint manufacturer instructions.

3. Once trees have been spray-painted and dried, apply Designer Dries Clear adhesive to them. With a paintbrush paint the adhesive onto all the edges.

4. Next sprinkle some #611 Antique Silver Glass Glitter or # 613 Diamond Dust onto the pinecone, let dry, shake off excess. For snowy trees apply the Dries White adhesive followed by Faux Snow.

5. Decorate with tinsel, tinsel garland, bulbs, millinery and glittered ornaments.

Koolaid Drink Mix Dye Recipe

In medium sized bowl mix the Koolaid powder with 1/4 to 1/3 cup white vinegar. For brighter colors use less water and more powder. For softer colors use more water. If Koolaid is not available replace with food coloring or inks.Pour Koolaid dye over your trees and turn w/tong until completely dyed, repeat until desired color is achieved, let set and dry 24 hours.Tips:-Try glittering your trees with a variety of glass glitter colors-Paint stripes onto your bottlebrush trees.-Turn the trees into dolls using clay or foam heads, and other embellishments-Glitter Christmas tree stems each with a different color or with two favorite colors, how about pink glass glitter on one stem and silver glass glitter on another stem.

Saturday, December 12, 2009

The Cupcake Stixs From Guest Designers!

Hello All,

We are now in the swing of things with Moonfaires World Designers and The Art-Stixs Magazine. Many of you know I create all types of works using my doll parts, one thing I do is create Charlotte Head Cupcake Stixs and Vintage Styrofoam Cupcake Stixs. I gave the cupcake stix kit to the goodie bags of the bellas at Silver Bella.

Here are what some Bella's did w/the ones they either received or bought from me. Other designers are customers from Etsy who shared with me their beautiful works!

In these photos Nina Little created Cupcake Stix Dollies w/her kit from Silver Bella, aren't they wonderful?

Miss Mendy purchased my Charlotte Cupcake Stixs and look what she did with them! DOn't you just want those cupcakes?

Cheryl Worthy aka Send A Celebration used the cupcake stixs in a new way, as the embellishment to top off her party hat. Cheryl sells a wonderful line of celebration works at her
Here is the listing for the wonderful hat which fits adults and children:

All images are copyrighted by the artist, please contact them if you have any photo questions on their images, artwork or to purchase!

Wednesday, November 25, 2009

Moonfaires World Guest Designers!

Hello All,
This is going to be the new location for the: "MoonFaires World Guest Designers",You will be able to read new cutting edge projects using our new extended line of doll parts and vintage products such as spun cotton doll heads, styrofoam heads, bisque parts, foam parts, lightweights, flat backs, rounded, doll head beads, and other doll oddities.

I will periodically have links to other creative sites who showcase or use our doll parts, have projects of ours on their sites, where we also guest design, do our works, work shops, events and more.

We love working with other companies using their glitters, Dresden's, vintage oddities, inks, wax, papers and more. I believe art supplies are always complimented by other art supplies, it joins us all together.

The choosen guest designers are exceptional in their fields and will bring you a variety of styles and ideas for each of you to experiment with.

Starting in December our designers will begin their journey into Moonfaires World using our doll parts and accessories, stay tuned for the magic!

Friday, February 20, 2009

Vintage Beeswax Doll

-Beeswax, Beeswax Pellets (Suze Weinberg)
-Melting Pot
-3-D Doll molds which can sustain hot wax
-Foil cookie sheet
-1/2 yard Muslim Fabric
-Scrap fabrics: Crinilon, Tulle, Lace, Tafeta, Velvet, etc.
-Sewing Machine
-Needle and thread

1. Pour beeswax into the melting pot and heat according to melting pot directions.
2. Place the mold of choice onto the cookie sheet to protect working surface.
3. Now pour the hot beeswax into the mold, let set/harden, pop out for a doll head, repear for the doll arms and legs, again using doll molds.
4. Pierce holes into the pieces, set aside.
5. Measure out 2 pieces of muslin to 8 inches long by 4 inches wide. Lay pieces on the rectangle shape, trace the ends onto the muslim with pencil, this will mark the place on the fabric where you will not sew.
6. Stitch the pieces together, remembering to leave the marked lines open. turn right side out, through one of the open holes.
7. Now insert the beeswax doll parts into their open slots, sew through their pierced holes and into the fabric with needle and thread, until secure.
8. Decorate with a homemade dress, paint, embellishments and more.

Project Options:
-Just make beeswax doll parts for your projects.
-Use a old cooking pot with thermometer to melt your beeswax (keep this pot now strickly for art projects)
-Make larger or smaller dolls and adjust your cloth body accordingly.
-Make Beeswax embellishments for scrapbooks and altered project glue in place with
E-6000 or clear caulk.
-Always use caution when working with hot, sharp or strong glue materials, remember good ventilation with strong chemicals and glues.

Doll Head Wands

Materials:-Half Doll, Tassel Doll or Doll Head
-Wooden Dowel, Cut 12 inches, 3/4 thick or wooden dowel to fit the doll piece
-Acrylic paints: Black and Pastel Color Palette
-Fabric Remnants: Crinilon, Tulle, Lace, Velvet,etc.
-Papers: Wall Paper, Piano Paper, Crepe Paper
-Embellishments: Trims, Ribbons, Broken Jewelry
-Glue: E-3000, Clear Caulk, Hot Glue, Hot Glue Sticks
-Glitter, Mica Flakes

1. Insert the fitted wooden dowel into the doll piece, glue in place with E-6000 glue or clear caulk, let dry a few hours.
2. Paint your wooden dowel with the acrylic paint of your choice, let dry.
3. Start embellishing your doll wand with a fabric, crinilon, lace or paper to make a neck collar.
4. Add broken jewelry bits, old buttons, rhinestones, trims on the dolls neck collar, and her hair using hot glue.
5. Finish with glitter or mica flakes where desired.

Project Options and Tricks:
-Add a crown/tiara to doll head, glue in place with E-6000 glue or caulk.
-Wrap ribbon, velvet, lace, piano paper or crepe paper around the wooden dowel.
-Cover the doll hair in rhinestones, sequins or glitter.
-Add fairy wings, millinery flowers or halo to the doll.

Tuesday, February 17, 2009

Sailor's Valentine Project

Sailor's Valentine Project

-Unfinished Wood Plaque, in heart, oval, or square shaped (Craft Stores)
-Fabric and Velvet scraps
-Bag of tiny shells
-Bag of medium/large sized shells
-Broken china pieces
-Buttons: Pearly and rustic colors
-Vintage ephemera, Images, cards
-paper doilies
-Hot glue, glue sticks
-E-6000 glue or clear caulk or vinyl spackle
-Other: ribbons, charms, millinery flowers, broken jewelry

1. Lay scrap fabric or velvet onto the plaque, measure to fit, hot glue to front of plaque and to the back of plaque.
2. Arrange your preferred doilies, ephemera, and images onto the velvet layered plaque, until you are satisfied with the arrangement, hot glue in place.
3. Now start layering shells around the border of the plaque, starting with the large shells first, then medium, fill in with the tiny shells, using E-6000 glue to hold in place, let set for a few hours.
4. Next finish embellishing your sailor valentine with broken china pieces, charms, ribbon work, broken jewelry, etc.

Tips:-If you do not have E-6000 glue, glue the shells, china bits, broken jewelry in place with either clear caulk or vinyl spackle.

-When working with any strong glue, use in a well ventilated are.

-Use pre-cautions with hot glue, if burned, dip into ice water immediately.

-Instead of velvet or fabric scraps use piano paper or vintage ephemera for the base before layering with shells and bits.

-Try an old bisque doll head in the center, glue in place with clear caulk, let dry, and layer with bits and pieces.

I will upload examples soon!

Sunday, February 8, 2009

Dresden Trim Ornament Project!

Dresden Trim Ornament Project!
Dresden Ornament! Angel!

What's better then a project consisting of Dresden trim, antique silver glitter, tinsel and vintage boullion, uhm....nothing, well maybe a 5 scoop hot fudge and toffee sundae with extra whipped cream and cherries, that could really top this, LOL!

Okay, I have been re-visiting my inner vintage and for the past year I have been experimenting with old projects from Dennison books, old crepe paper books, crafts and design books, vintage christmas catalogs and more, looking for ways to simplify the projects I saw, and giving them a twist, some pastel colors, mixed with gold or over the top distressed. As a result I have re-discovered the art of our past and learned to make over 28 vintage items from crepe paper dolls made 5 different ways, tiny styrophom angels, cone dolls, Victorian Ornaments, Paper Mache goodies, Charlotte Dolls, Carnival Dolls and more.
Dresden Ornament! Fairy
The following project was created from a turn of the century ornament I have, it acted as the muse for this project made from Dresden Trim, tinsel, boullion, images and a small oval Christmas Ornament, along with some supplies.
Dresden Ornament! Spring!
Here are the instructions, which will be followed by a quick demo!

Dresden Trim Ornament
-Small oval shaped Christmas Ornament (about 2 to 3 inches long)
-Two thick Chenille Stems in Metallic Gold
-One strand of boullion
-A strip of thin Dresden trim
-Dresden trim small medallion shape, or tiny gold charm
-Vintage image of choice
-Small piece of scrap book paper
-Antique Silver Glitter (Martha Stewart)
-Hot glue, glue gun, regular glue stick

1. Wrap a piece of chenille stem around the center of the Christmas ornament, only once, with hot glue, cut the left over stem to 4 inches, repeat on the left and right side ends of the bulb. (Refer to project sample and demo).
2. Twist the three ends to form a triangle shape.
3. Choose a vintage image that is sized to fit the center of the ornament, between the bulb base and the chenille stem top. Layer your image onto sturdy card stock, with glue stick, then cut out and hot glue to center of the bulb.
4. Hot glue the thin dresden trim down, alond the front center of the bulb.
5. Wrap the ornament 4 times, with un-raveled boullion, hot glue end in place.
6. Glue on some silver glitter
7. Finish embellishing with Dresden medallions, extra trim or other vintage oddities.

1. Use ditressed tinsel, refer to project below this post.
2. Use red or pink chenille stems for Valentines Day or Easter.
3. If you don't have boullion, use tin DMC metallic gold thread, unravel a bit.
4. Try using a round Christmas Bulb or painted styrophom ball instead of the oval ornament.
5. Use images of family members in place of Victorian Clip art or collage images.
6. Use Small paper craft punches, cover them in silver or gold vintage glass glitter or Martha's Antique silver glitter, in place of the Dresden trim medallion.
Dresden Glass Ornaments!

Distressing Tinsel, Chenille Stems/Pipe Cleaners!

Distressing Tinsel, Chenille Stems/Pipe Cleaners!

Do any of you like the look of aged Tinsel, those vintage raggedy distressed strands of glimmer and age, if you said yes, then you are in the right place. For years I have searched Antique Markets, Flea Markets, Garage Sales, Vintage Fairs and Online to get my hands of old Tinsel. When I have found it, the price is beyond reason, sometime sfetching $150 for a few feet at best. There are reproductions which look very old and save on your budget, but after awhile when you are using alot of it, the price can add up! That's when I said, if we can age paper, fabric, and other materials why not new chenille stems formally known as Pipe Cleaners, which come in a variety sizes, colors, and shapes, from Metallic to fluffy pastels, the colors are endless and always available, however if its a vintage look you are seeking, these bright shiny stems ususally cheapen the look since they are well new. I'm here to change that.

Now I know there are several vintage artists out there, all who have their own methods and techniques, after all, having options in art in what I love. For this project you will need the following:

-Chenille stems, in any shape, color, size or thin Metallic Christmas Garland
-Liquid starch
-Expresso, dark brown or deep taupe acrylic craft paint
-Old cookie sheet or metal pan
-Paper plate
-Water cup and large paint brush

1. Pour enough liquid starch onto a paper plate, covering the whole center of it.
2. Squeeze out 4 drops of acrylic paint into the liquid starch, stir, until you get a muddy and cloudy looking paint mix.
3. Now drop your chenille stem into the mixture, and with apint brush brush on the mix until coat, shake off excess and place on cookie sheet or metal pan to dry, about 10 to 15 minutes, repeat the steps above at least 4 times for the best grunge look.
4. Now when satisfied with the aging process, distress your tinsel to achieve that choppy sparce look, with a craft scissor, just randomly cut into the chenille stem, cutting out and trimming the stem.
5. Your done, start making some new vintage art.

-The liquid starch also works as a stiffener to dull and stiffen the tinsel, for that old brittle feel.
-For extra aging take a cheese cloth or a bingy cloth and dip into a can of shoe polish. Then wipe directly onto the already aged chenille stem, until you achieve that extra grunge.
-With hot water mix coffee, and tea packets until dark, place in an oven safe glass pan, pour in, about 1/4 deep, lay your vast batch of un-aged chenille stems into the glass pan, bake at 375 degrees for 10-15 minutes, all over ranges differ, so please keep an eye on the pan, so you don't have a burn batch.
-You could also use antiquing mediums as well!

For a demo of this, click on the link below. The video is a bit grainy, since I had to use my regular camera to film, until we get our Flip camera, then I will re-shoot for you, but for now, this shows you and can be used as a guide with the above instructions and tips!

Distressing Crepe Paper, Tinting Mica Flakes Recipes!

Here is my recipe for distressing crepe paper and letting clear mica flakes look tinted:

-Cream Crepe Paper (Use White, or Beige for a substitute)
-Perfect Pearls (Rustic Colors: Gold, Bronze, etc.)
-Martha Stewart Clear Mica Flakes
-Elmers Gel Glue

1. Layer the desired art piece with crepe paper such as crepe papering the bottom of a crown base for a ruffled look or using crepe paper to make a doll skirt or a collar.
2. Now cover the crepe paper with the Gel glue, rubbing the glue onto the crepe paper with your fingers, lightly.
3. While the glue is still wet, dip your finger into the perfect pearl color of choice and rub into the wet glue, again, lightly.
4. Rub some more glue onto the top of this, then sprinkle with Mica Flakes, tap off excess and let dry for an hour.

This will give you the same look of the doll collar on my Faerie Shrine Ciagr Box Front Cover.

Other Options:
-Using strong coffee that's been steaping for a day to paint onto the crepe paper, or strong tea.
-Use antique glazing medium to spread onto the crepe paper.

For Dying/Staining Mica Flakes:

-Small paper bowl (soup bowl size)
-2 Tablespoons Water
-2 squirts of Tim Holtz Distressing Ink in Walnut
-Clear Mica Flakes by Martha Stewart

1. Drop 2 Tablespoons water into small bowl
2. Squirt the ink into the water, mix with a craft stick or plastic spoon
3. Pour mica flakes into the bowl until covered, mix, let dry over night.
4. Now decorate your favorite projects!
-Use other ink colors for different looks
-Try food coloring.

Tiara/Crown Tutorial

The Tiara/Crown Tutorial!

Hello All,

As I promised, here is a tutorial for making paper or fabric crowns.


-Large Poster Board Sheet, Any color (or) Sturdy Cardstock

-Generic Paper/Cardstock

-A multitude of designer Papers or Fabric ( Designer, Scrapbook, Wallpaper, or Contact Paper, basically prints which you like)

-A variety of Vintage Images

-Fabric Trims: Scraps, Tinsel, Holiday Tinsel Garland, Sequims, Ribbons, Etc.


-Paints, Inks, Glitters, Glitter Pens/Glues

-Gesso and Gel Medium

-Scissors: tiny and regular sizes, decorative (optional)

-Oddities: Jewelry Bits/Findings, Rhinestones, Metal Pieces, letters: Foam, Wood, ChipBoard, ect.

1.Measure your head, to determine the size of your crown.

2.Make a Pattern for your crown. Go from classic point top, to large and wavy, the choice is yours. See my crowns for examples or research crown/tiara shapes on the computer or book store.

3. After you have traced your pattern onto the poster board, cut it out.

4. Now apply some generic paper in anycolor to the poster board crown on both sides with glue, making sure to get all the bubbles out. A brayer or rolling pin works well, let dry!

5. Now apply a layer of gesso to both sides, let dry.

6. Next find paper that you like and apply to the poster board on both sides with glue, again rolling out the air bubbles. Try using a mix of papers for a more unique look. Example: The inside of the crown could be beige paper and the outside main part could be striped paper.

7. When glue is dry, apply a layer of gel medium to both sides of the crown. This gives the piece flexibility, to bend with out distorted cracks or weird paper bubbles and lines.

8. When Gel Medium dries, you are ready to paint, embellish, decorate your crown.

9. For crown security and to keep on your head, I glue ribbon to the middle of each crown end, so I can tie it closed with a bow. Example: think of how you tie and apron closed.

10. Last Step, get a cup of tea, find your favorite chair and put on your crown that you made, which is fit for a Queen!

When making Image Transfers

When making Image Transfers:
1. Try using lazer copies, go to staples or a copy center and make a color copy of the images you want to use. Then place color side down onto the packaging tape, and smooth the image into it really good.Then soak in water for a minute or two, needs to be really wet. Then start rubbing it off, should work then, let me know if it doesn't.

2. Another great way to transfer images is to take a wood stain pen usually in a neutral color, or a wood blender pen. place lazer color copy down on piece you are transfering to, and saturate with the marker on the back side, until image is transfered, then seal with matte sealer or gel medium.

3. Liquid Sculpty, pour/rub liquid sculpty over lazer color copy, bake, then soak in water and rub off. Try using translucent sculpty for a backdrop!

Vintage Crepe Paper and Party Decorating Book!

Vintage Crepe Paper and Party Decorating Book!
I love Vintage, anything vintage, pretty much every decade in time has some kind of appeal to me, from Ancient Egypt, Mythological Greece (Atlantis), Renaissance, Edwardian, Marie Antoinette's France, Colonial, Regency, Victorian, The Roaring Twenties, Gilded Age, 1950's, and in between. I won't consider 80's vintage yet, then I will start to reveal my age! LOL!

Lately I have been fascinated by: Marie Antoinette, Victorian, Roaring Twenties and 1950's Soda Pop Chic or Cupcake Chic as I like to call it. Buying images, prints, books from children to bake and craft books, ephemera, tea ware, costumes, dolls and other eclectic oddities.

On a stroll through my fave antique center: Blackwell Antiques Center in Dover, NJ I happened upon some amazing vintage treasures such as a few children illustrations, postcards, game pieces, doll clothes and these two incredible books:

Dennison's How To Make Party Favors and Table Decorations 1928 and Dennison's How To Make Crepe Paper Flowers 1929 Can I just say I love these, they have re-inspired my vintage muse and have given me a whole new love for Crepe Paper....
Here is a preview of some of the pages in the Party Favors Book which are amazing:

One wonderful artist who I met through pure serendipity and who I consider a dear friend is ANN-DENISE ANDERSON
to me she is the Queen of Crepe, her whimsical works always put a smile on my face!

P.S. Click on the pictures for a larger view so you can view the writing, directions and images!